43Gbps DPSK Balanced Photo-receiver, U2T (Finisar) BPRV2123(M), Turnkey Module

Description

DESCRIPTION
The balanced receiver module is ideally suited for a variety of applications up to 43 Gbps such as D/BPSK, D/QPSK and . The module consists of a pair of balanced photodiodes and a high-gain limiting transimpedance amplifier. The module has a typical conversion gain of 2400 V/W. Its dynamic signal integrity control allows excellent OSNR performance , which result in optimum eye pattern and the minimum bit errors ratio. The module is available with differential GPPO RF outputs , AC or DC coupled versions.
FEATURES
Sensitivity, -10dBm typical, C&L Band
Typical 35GHz 3dB cut-off frequency
550mVpp differential output voltage
Auto Optimum Signal Integrity Control
APPLICATIONS
43Gbps DPSK, QPSK Optical Transceiver
Radio Over Fiber, and Fiber Sensing
Testing and Measurement
SPECIFICATION
Parameters
Unit
Parameter
Min.
Typ.
Max.
Operating Wavelength
nm
1530
1550
1620
3dB Bandwidth
GHz
27
35
–
Optical Input Power Range/Port
dBm
-10
–
4
Differential Conversion Gain
V/W
-
2400
-
Maximum Output Voltage Swing
mVpp
–
500
-
DC output offset
(for DC coupled version only)
mV
–
200
–
Photodiode DC Responsivity
A/W
0.5
0.6
0.75
Bit rate
Gbps
–
43
–
Skew
ps
–
1
5
Equivalent input noise density
pA/√Hz
–
80
100
Photodiode dark current/PD
nA
–
5
50
Signal  Output and Couple
–
Differential, DC Coupled
RF Output Port
–
GPPO Malex2
Optical Fiber and Connector
–
SM28-e, FC/APC
Adjustment Mode
–
Auto Optimum Signal Integrity Tuning
Operating Temperature
℃
0 ~50
Power supply*
–
DC 5V, 0.5A (Module)
Dimensions  (L×W×H)*
mm
100×80×20 (Module)
Note: *The specifications subject to change without notice.
*The appearance and the key component varies  according to different performance requirements.
*Please contact us for O band or AC coupled RF output.
Standard Accessories
1. AC220~110V - DC5V Adapter;