-40%

Accessories Adapter Black DIY For Makita 18V Li-ion Battery To Dock Power

$ 11.51

Availability: 96 in stock
  • Outgoing wire length: about 150mm
  • Package Contents: 1 *DIY adapter (not including battery)
  • Colour: Black
  • Brand: Unbranded
  • Applicable models: For Makita 18V BL
  • Wire gauge: wire 1332 14AWG (high temperature resistant)
  • Condition: New
  • Plastic: mold injection ABS+PC material

    Description

    Accessories Adapter Black DIY For Makita 18V Li-ion Battery To Dock Power
    DESCRIPTION
    Accessories Adapter Black DIY For Makita 18V Li-ion Battery To Dock Power
    Product Description:
    1. The battery adapter/connector has been tested and can be used with Makita 18V BL series lithium batteries.
    2. Compatible battery: BL1800 series
    3. Made by molds, not 3D printers, requiring a lot of welding and assembly
    4. There is no built-in protection PCBA, so please take good care of the battery and don't expose it to hot weather
    5. The adapter has been installed with 150 mm line 14
    Applicable models: BL1415 BL1430 BL1430B BL1815 BL1815B BL1820 BL1820B BL1830 BL1830B BL1840 BL1840B BL1850 BL1850B BL1860 BL1860B BL1845 BL1890 BL1890B; 14.4V/18V lithium battery...
    Note:
    This adapter has not been used for a long time, please store it separately from the battery
    The adapter cannot charge the Makita 18V battery. This is not a charger. It only outputs battery voltage and power directly from the battery.
    It is forbidden to directly weld the copper core of the product, otherwise it will cause the product to be deformed and damaged
    If you need to re-solder the cable, remove the copper core and solder
    Product parameters:
    Plastic: mold injection ABS+PC material
    Outgoing wire length: about 150mm
    Colour: Black
    Wire gauge: wire 1332 14AWG (high temperature resistant)
    Applicable models: Makita 18V BL
    Precautions:
    1. This is not a charger, it only outputs battery voltage and power directly from the battery.
    2. Do not use this adapter to charge the battery. Do not short-circuit the battery or continuously consume more than 20 amperes of current. Disconnect the battery before the battery reaches 14 volts (extend battery life). Do not charge at 100% for a long time. It is recommended Store battery at 70% power (extend battery life)
    Package list:
    1 *Only 1 DIY adapter (not including battery)
    Note:
    1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2. Please allow slight manual measurement deviation for the data.
    POLICES
    Shipping
    Payment
    WARRANTY
    We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
    Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
    It takes about 7-15 working days to Canada; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
    Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.