AR45 Softwash Skid Honda GX200

Description

he AR 45 Softwash Skid with a Honda engine is an awesome cleaning machine!
Pump: AR45LFP-GR-GCI Manufactured by Annovi Reverberi, AR North America
Max Pressure: 290 PSI
Max GPM: 11.4
Engine: Honda GX200
Other: pump & engine are mounted on a stainless steel skid plate with rubber bumpers.
Helpful Info:
Inlet Size: 1 1/4"
Bypass Size: 3/4"
Outlet Size: 1/2"
If using a proportioner, we recommend using the HydroMixer XL or XXL
Shipping Info: This item will ship on a pallet with a freight truck. Our system will automatically calculate a shipping price based upon a commercial address with a forklift or loading dock available. This is our preferred shipping method. We do offer residential service with a liftgate. If the address you provide is calculated as residential we will email you a quote for the additional services needed.
Please Provide a valid phone number. The freight line may require contacting you via phone call before delivery. You must be home to sign for and accept the delivery. If there is any shipping damage, you must have the driver note it before signing.
*Shipments to California are not available at this time. CA customers must contact us directly to check machine's compliance before shipping quotes will be provided.
This AR45 Pump is rated at 11.4 GPM @ 290 PSI. It does include the gearbox. This pump/ gearbox pair may be mounted to a 3/4" horizontal shaft motor such as a GX160 or GX200.
Read Your Pump & Engine Manual Thoroughly before use. The pump manual is available at the ARNorthamerica website.
Also, make sure you have thoroughly read the labels and SDS data for any chemicals that you are using with this pump and follow any directions / precautions.
A few important notes:
These pumps do have a limited warranty against manufacturer's defects. The warranty is void with use of harsh chemicals such as sodium hypochlorite. We do recommend that you thoroughly run and test your pump with water only before using it with any chemicals. Any pump defects are typically noticeable within the first hour of testing. Leaks and issues that arise after testing are typically due to chemical use.
The pump does have a Max PSI rating of 290 but we recommend that you keep the pressure set below 250 PSI to maximize the pump life and decrease leaks. If using this pump with a proportioner / manifold system, make sure that you are using a minimum of a 3/4" metering valve that is not flow restrictive. Also, use a minimum of 25' of bypass hose with proportioner use.
Always Pull the trigger when starting & stopping your engine to prevent pressure spikes which could lead to premature leaks.
This is a very high volume pump. We recommend professional set/ up installation of plumbing. Make sure your hoses, wands, etc. all have adequate pressure ratings to accommodate this pump. Be aware that leaks can and will happen. Have proper materials on hand to clean up/ neutralize any chemicals spilled when a leak occurs.
If you have any questions about this pump , please contact us.
Thank you!
North Georgia Airless