For 86-95 Toyota Pickup Set of 4 Front Outer Tie Rod Pitman Arm Idler Arm Kit

Description

Steering Systems   The steering system works with the suspension system to provide directional control with a comfortable amount of steering effort. It must do this while allowing for the necessary movement in the vehicle’s suspension system. Some parts serve both systems. The steering system consists of a steering gear, steering linkage, a steering column and a steering wheel. Two types of steering systems are widely used in today's vehicles: "rack-and-pinion" steering and "conventional" steering.
Typical Pitman Arm Replacement Guideline:
For 86-95 Toyota Pickup Set of 4 Front Outer Tie Rod Pitman Arm Idler Arm Kit
Steering Systems
The steering system works with the suspension system to provide directional control with a comfortable amount of steering effort. It must do this while allowing for the necessary movement in the vehicle’s suspension system. Some parts serve both systems. The steering system consists of a steering gear, steering linkage, a steering column and a steering wheel. Two types of steering systems are widely used in today's vehicles: "
rack-and-pinion
" steering and "
conventional
" steering.
Typical Pitman Arm Replacement Guideline:
Some pitman arms contain a ball socket joint on the outer end. The threaded extension on this ball socket fits into the center link. On other steering linkages, the ball socket joint is in the center link, and the threaded extension fits into the pitman arm opening. If the pitman arm is bent, it must be replaced because the tie-rod is not parallel to the lower control arm. Under this condition, excessive front wheel toe change occurs on road irregularities, and front tire wear may be excessive.
The following is a typical pitman arm replacement procedure:
(1).Position the front wheels straight ahead, and remove the cotter pin and nut from the ball socket joint on the outer end of the pitman arm.
(2).Remove the ball socket extension from the pitman arm or center link with a tie-rod end puller.
(3).Loosen the pitman-arm-to-pitman-shaft nut.
(4).Use a puller to pull the pitman arm loose on the shaft.
(5).Remove the nut, lock washer, and pitman arm.
(6).Check the pitman shaft splines. If the splines are damaged or twisted, the shaft must be replaced.
(7).Reverse steps 1 through 5 to install the pitman arm. The pitman arm-to-shaft nut and the ball socket extension nut must be tightened to the manufacturer's specified torque. Be sure the pitman arm is installed in the correct position on the shaft splines. Install the cotter pin in the ball socket extension.
Typical Idler Arm Replacement Guideline:
The idler arm adjustment is very important. If this adjustment is incorrect, front wheel toe is affected. After idler arm replacement, the front wheel toe should be checked.
(1).Remove the idler-arm-to-center-link cotter pin and nut.
(2).Remove the center link from the idler arm.
(3).Remove the idler arm bracket mounting bolts, and remove the idler arm.
(4).If the idler arm has a steel bushing, thread the bracket into the idler arm bushing until the specified clearance is obtained between the center of the lower bracket bolt hole and the upper idler arm surface.
(5).Install the idler arm bracket to frame bolts, and tighten the bolts to the specified torque. Be sure that lock washers are installed on the bolts.
(6).Install the center link into the idler arm, and tighten the mounting nut to the specified torque. Install the cotter pin in the nut.
(7).If the idler arm contains a grease fitting, lubricate as required.
Frequently Asked Questions
(1).What is the pitman arm all about?
Not the sexiest of all automotive parts, the pitman arm, named after railroad engineer George Pitman, is tasked with steering your car. The pitman takes the circular motion generated by the sector shaft and converts it so that it can be used to turn the wheels. The pitman arm, supported by the sector arm, is attached directly to the steering gearbox.
(2).How long does a pitman arm last?
The most common type of wear and tear for the pitman arm is actually to the ball socket located at the end of the arm. Like all other ball joints, this one will eventually wear out and need to be replaced. Regular lubrication can prolong its life, though. The pitman arm and other front end components should be lubricated at every service (oil change) and should be inspected regularly to prevent these problems from becoming severe.
(3).Why should I get my pitman arm inspected on a regular basis?
The pitman arm needs regular maintenance. If it receives that maintenance, it will easily last the life of your car. However, if you fail to give it regular maintenance, you will find that between 30,000 and 50,000 miles, your car's steering will falter. To prevent this, vehicle owners should have their pitman arm inspected regularly. However, if you drive in rough, rocky, off-road or other harsh conditions, the pitman arm will deteriorate quickly.
(4).What common symptoms indicate pitman arm needs to be replaced?
Considering how important the pitman arm is to control over the vehicle, it is essential that you know a few signs and symptoms to look for that indicate unusual wear or impending failure. These signs include:
1.Grease around the boot at the end of the pitman arm
2.Your steering feels abnormal, or that it's slipping
3.There's too much play in the steering wheel
4.The steering feels like it's wandering
(5).What is the result when pitman arm fails?
The result is that you run the very real risk of losing steering control due to pitman arm failure. When the pitman arm fails, there is no longer a connection between the sector shaft and the wheels. When that direct connection is lost, you lose the ability to steer, which can result in dangerous consequences.
(6).What is the symptom when idler arm wears out?
A worn and loose idler arm results in excessive freeplay of the steering linkage. It makes the vehicle wander on the road. If you experience any of the symptoms mentioned above, you may need to replace your idler arm to prevent possible damage to your car's steering system.
(7).How to diagnose a bad idler arm?
To diagnose a bad idler arm you only have to observe the connections as the wheels are turned. Observe the connection at the end of the idler arm, where the shaft is set into the bushing near the wheel. Use the flashlight if necessary. If the shaft of the idler arm moves in any direction, prior to the wheel beginning to turn, the bushing is bad and the idler arm needs to be replaced.
(8).Road Walking
Also known as road wandering, this scary phenomenon occurs when a vehicle seems to wander or weave back and forth on its own. If you are being attentive and steady on the steering wheel but are experiencing road walking, it will be genuinely difficult for you to keep the vehicle straight.
(9).Play In The Wheel
If you have suspicions that the idler arm is in poor condition, this symptom can be tested under safer and easier conditions than road walking. While the vehicle is sitting still, try moving the steering wheel. If you can move the wheel considerably from side to side without much resistance, your steering wheel has too much play.
While you certainly don't want your car to be unresponsive when you make steering maneuvers, a wheel that has too little resistance is also bad and a sign of idler arm problems.
(10).Free Wheeling
This symptom can only be observed and tested in a garage or mechanic setting, as the car must be raised so that the front wheels are suspended off of the ground.
Always use suggested and available safety equipment when working underneath a vehicle.
While the vehicle is raised, go to your front wheels and without manipulating the steering wheel at all, see if it's possible to move the front wheels from side to side. If the wheels do shift back and forth, it's a sign that you should look into the idler arm.
Item Specifics
Brand
ECCPP
Manufacturer Part Number
E81059601CP
Interchange Part Number
ES2376 K9422 K9424
OE Spec or Performance/Custom
OE Spec
Fitment Type
Direct Replacement
Custom Bundle
Yes
Greasable or Sealed
Greasable
Warranty
10 Year
Fitment
For Toyota 4Runner & Pickup
Included Hardware
Mounting Hardware
Kit Parts Included
Tie Rod End Pitman Arm Idler Arm
Quantity
4pieces
UPC
Does not apply
Surface Finish
Standard
Placement on Vehicle
Left
Cross Reference Part Number 1
198 6198 7 1988 1989 1990 1991 1992 1993 1994 1995
Kit or Single Part
Kit
Placement on Vehicle
Left
Cross Reference Part Number 1
198 6198 7 1988 1989 1990 1991 1992 1993 1994 1995
Kit or Single Part
Kit
Item Specifics
Brand
ECCPP
Manufacturer Part Number
E81059601CP
Interchange Part Number
ES2376 K9422 K9424
OE Spec or Performance/Custom
OE Spec
Fitment Type
Direct Replacement
Custom Bundle
Yes
Greasable or Sealed
Greasable
Warranty
10 Year
Fitment
For Toyota 4Runner & Pickup
Included Hardware
Mounting Hardware
Kit Parts Included
Tie Rod End Pitman Arm Idler Arm
Quantity
4pieces
UPC
Does not apply
Surface Finish
Standard
Placement on Vehicle
Left
Cross Reference Part Number 1
198 6198 7 1988 1989 1990 1991 1992 1993 1994 1995
Kit or Single Part
Kit
Placement on Vehicle
Left
Cross Reference Part Number 1
198 6198 7 1988 1989 1990 1991 1992 1993 1994 1995
Kit or Single Part
Kit
Discount
Targeted Disounts Terms
(1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items.
(3).Targeted Discount will be refunded from buyer's payment, which means ECCPPAUTOPARTS won't provide any extra targeted discounts if full refund is issued.
Targeted Shipping Discount
(4).
Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV).
If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items.
Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes.
(5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
(6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures.
Shipping
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
(1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
(2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable.
(3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
(4).Global Shipping Program is temporarily not available due to the reason for package dimensions.
(5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
(6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
(7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of 0 or more.
Warranty
Items valued over on eBay that include a warranty or service contract must contain additional details in seller's listing description.
10 Year Warranty Terms and Procedures
(1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
(3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period.
(4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
(7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately.
(8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price.
(9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures.
Return
(1).Most of items support 60 Days Money Back Guarantee.
(2).Refunds will be credited within 2 or 3 business days after returned item(s) is received.
Best Sales
For 1999-2006 Chevy Silverado GMC Sierra Manual Telescoping Towing Side Mirrors
USD 73.50
Front Wheel Hub Bearing For Chevy Impala Pontiac Grand Prix Buick 513121 5 Lug
USD 37.46
Wheel Bearings For Chevy Impala Pontiac Grand Prix Buick Regal Bearing 2 Front
USD 58.87
2 Pcs Front Hood Lift Supports Struts Shocks Springs For Dodge Ram 2002-2010
USD 22.68
2x For 1999 2000 2001 2002 2003 2004 2005 2006 2007 Ford F150 Remote Car Key Fob
USD 10.80
Newly Listed
Full Gasket Set 2009-2010 Fit for Chevrolet Traverse 3.6L 3564CC 217CID V6
USD 194.69
Fits 2005-2009 Jeep Liberty Dodge Dakota Nitro 3.7L Full Gasket Set Oil Pan
USD 156.09
4x 2.5" 13 led clear cover red new + yellow tail turn side lights universal
USD 19.99
For Toyota Camry 2.2L 3.0L 1992 1993 1994 1995 1996 Radiator Coolant Tank
USD 13.99
Head Gasket Set Intake Exhaust Valves Bolts For Acura MDX 01/02 3.5L HS26260PT-1
USD 190.09
For 86-95 Toyota Pickup Set of 4 Front Outer Tie Rod Pitman Arm Idler Arm Kit
Steering Systems
The steering system works with the suspension system to provide directional control with a comfortable amount of steering effort. It must do this while allowing for the necessary movement in the vehicle’s suspension system. Some parts serve both systems. The steering system consists of a steering gear, steering linkage, a steering column and a steering wheel. Two types of steering systems are widely used in today's vehicles: "
rack-and-pinion
" steering and "
conventional
" steering.
Typical Pitman Arm Replacement Guideline:
Some pitman arms contain a ball socket joint on the outer end. The threaded extension on this ball socket fits into the center link. On other steering linkages, the ball socket joint is in the center link, and the threaded extension fits into the pitman arm opening. If the pitman arm is bent, it must be replaced because the tie-rod is not parallel to the lower control arm. Under this condition, excessive front wheel toe change occurs on road irregularities, and front tire wear may be excessive.
The following is a typical pitman arm replacement procedure:
(1).Position the front wheels straight ahead, and remove the cotter pin and nut from the ball socket joint on the outer end of the pitman arm.
(2).Remove the ball socket extension from the pitman arm or center link with a tie-rod end puller.
(3).Loosen the pitman-arm-to-pitman-shaft nut.
(4).Use a puller to pull the pitman arm loose on the shaft.
(5).Remove the nut, lock washer, and pitman arm.
(6).Check the pitman shaft splines. If the splines are damaged or twisted, the shaft must be replaced.
(7).Reverse steps 1 through 5 to install the pitman arm. The pitman arm-to-shaft nut and the ball socket extension nut must be tightened to the manufacturer's specified torque. Be sure the pitman arm is installed in the correct position on the shaft splines. Install the cotter pin in the ball socket extension.
Typical Idler Arm Replacement Guideline:
The idler arm adjustment is very important. If this adjustment is incorrect, front wheel toe is affected. After idler arm replacement, the front wheel toe should be checked.
(1).Remove the idler-arm-to-center-link cotter pin and nut.
(2).Remove the center link from the idler arm.
(3).Remove the idler arm bracket mounting bolts, and remove the idler arm.
(4).If the idler arm has a steel bushing, thread the bracket into the idler arm bushing until the specified clearance is obtained between the center of the lower bracket bolt hole and the upper idler arm surface.
(5).Install the idler arm bracket to frame bolts, and tighten the bolts to the specified torque. Be sure that lock washers are installed on the bolts.
(6).Install the center link into the idler arm, and tighten the mounting nut to the specified torque. Install the cotter pin in the nut.
(7).If the idler arm contains a grease fitting, lubricate as required.
Frequently Asked Questions
(1).What is the pitman arm all about?
Not the sexiest of all automotive parts, the pitman arm, named after railroad engineer George Pitman, is tasked with steering your car. The pitman takes the circular motion generated by the sector shaft and converts it so that it can be used to turn the wheels. The pitman arm, supported by the sector arm, is attached directly to the steering gearbox.
(2).How long does a pitman arm last?
The most common type of wear and tear for the pitman arm is actually to the ball socket located at the end of the arm. Like all other ball joints, this one will eventually wear out and need to be replaced. Regular lubrication can prolong its life, though. The pitman arm and other front end components should be lubricated at every service (oil change) and should be inspected regularly to prevent these problems from becoming severe.
(3).Why should I get my pitman arm inspected on a regular basis?
The pitman arm needs regular maintenance. If it receives that maintenance, it will easily last the life of your car. However, if you fail to give it regular maintenance, you will find that between 30,000 and 50,000 miles, your car's steering will falter. To prevent this, vehicle owners should have their pitman arm inspected regularly. However, if you drive in rough, rocky, off-road or other harsh conditions, the pitman arm will deteriorate quickly.
(4).What common symptoms indicate pitman arm needs to be replaced?
Considering how important the pitman arm is to control over the vehicle, it is essential that you know a few signs and symptoms to look for that indicate unusual wear or impending failure. These signs include:
1.Grease around the boot at the end of the pitman arm
2.Your steering feels abnormal, or that it's slipping
3.There's too much play in the steering wheel
4.The steering feels like it's wandering
(5).What is the result when pitman arm fails?
The result is that you run the very real risk of losing steering control due to pitman arm failure. When the pitman arm fails, there is no longer a connection between the sector shaft and the wheels. When that direct connection is lost, you lose the ability to steer, which can result in dangerous consequences.
(6).What is the symptom when idler arm wears out?
A worn and loose idler arm results in excessive freeplay of the steering linkage. It makes the vehicle wander on the road. If you experience any of the symptoms mentioned above, you may need to replace your idler arm to prevent possible damage to your car's steering system.
(7).How to diagnose a bad idler arm?
To diagnose a bad idler arm you only have to observe the connections as the wheels are turned. Observe the connection at the end of the idler arm, where the shaft is set into the bushing near the wheel. Use the flashlight if necessary. If the shaft of the idler arm moves in any direction, prior to the wheel beginning to turn, the bushing is bad and the idler arm needs to be replaced.
(8).Road Walking
Also known as road wandering, this scary phenomenon occurs when a vehicle seems to wander or weave back and forth on its own. If you are being attentive and steady on the steering wheel but are experiencing road walking, it will be genuinely difficult for you to keep the vehicle straight.
(9).Play In The Wheel
If you have suspicions that the idler arm is in poor condition, this symptom can be tested under safer and easier conditions than road walking. While the vehicle is sitting still, try moving the steering wheel. If you can move the wheel considerably from side to side without much resistance, your steering wheel has too much play.
While you certainly don't want your car to be unresponsive when you make steering maneuvers, a wheel that has too little resistance is also bad and a sign of idler arm problems.
(10).Free Wheeling
This symptom can only be observed and tested in a garage or mechanic setting, as the car must be raised so that the front wheels are suspended off of the ground.
Always use suggested and available safety equipment when working underneath a vehicle.
While the vehicle is raised, go to your front wheels and without manipulating the steering wheel at all, see if it's possible to move the front wheels from side to side. If the wheels do shift back and forth, it's a sign that you should look into the idler arm.
Item Specifics
Brand :
ECCPP
Manufacturer Part Number :
E81059601CP
Interchange Part Number :
ES2376 K9422 K9424
OE Spec or Performance/Custom :
OE Spec
Fitment Type :
Direct Replacement
Custom Bundle :
Yes
Greasable or Sealed :
Greasable
Warranty :
10 Year
Fitment :
For Toyota 4Runner & Pickup
Included Hardware :
Mounting Hardware
Kit Parts Included :
Tie Rod End Pitman Arm Idler Arm
Quantity :
4pieces
Surface Finish :
Standard
Placement on Vehicle :
Left
Cross Reference Part Number 1 :
198 6198 7 1988 1989 1990 1991 1992 1993 1994 1995
Kit or Single Part :
Kit
Placement on Vehicle :
Left
Cross Reference Part Number 1 :
198 6198 7 1988 1989 1990 1991 1992 1993 1994 1995
Kit or Single Part :
Kit
Item Specifics
Brand
ECCPP
Manufacturer Part Number
E81059601CP
Interchange Part Number
ES2376 K9422 K9424
OE Spec or Performance/Custom
OE Spec
Fitment Type
Direct Replacement
Custom Bundle
Yes
Greasable or Sealed
Greasable
Warranty
10 Year
Fitment
For Toyota 4Runner & Pickup
Included Hardware
Mounting Hardware
Kit Parts Included
Tie Rod End Pitman Arm Idler Arm
Quantity
4pieces
Surface Finish
Standard
Placement on Vehicle
Left
Cross Reference Part Number 1
198 6198 7 1988 1989 1990 1991 1992 1993 1994 1995
Kit or Single Part
Kit
Placement on Vehicle
Left
Cross Reference Part Number 1
198 6198 7 1988 1989 1990 1991 1992 1993 1994 1995
Kit or Single Part
Kit
Discount
Shipping
Warranty
Return
Feedback
Targeted Disounts Terms
(1).Targeted Discount Terms only apply to auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).If you have reached any targeted discount threshold(s), please contact our customer services after you received all your items.
(3).Targeted Discount will be refunded from buyer's payment, which means ECCPPAUTOPARTS won't provide any extra targeted discounts if full refund is issued.
Targeted Shipping Discount
(4).
Since our warehouse is located in Los Angeles, California, therefore you are qualified for extra 2% targeted shipping discount off the item sales if shipping address of your order is in California(CA), Washington(WA), Oregon(OR), Nevada(NV).
If you have reached this targeted shipping discount threshold, please contact our customer services after you received all your items.
Note: Item sales means your payment for the product(s) only, excluding shipping and handling charges, US internet sales taxes.
(5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
(6).ECCPPAUTOPARTS has the final power of interpretation of all the above Targeted Discount Terms and Procedures.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm.
(1).Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.
(2).Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable.
(3).USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.
(4).Global Shipping Program is temporarily not available due to the reason for package dimensions.
(5).We usually need a 1-2 business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6 business days after your payment is received.
(6).Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.
(7).Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of 0 or more.
Items valued over on eBay that include a warranty or service contract must contain additional details in seller's listing description.
10 Year Warranty Terms and Procedures
(1).The warranty terms only apply to the auto parts purchased from ECCPPAUTOPARTS, which only includes suspension kit, control arm, tie rod end, ball joint, sway bar, stabilizer link, pitman arm, idler arm, steering center link.
(2).ECCPPAUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
(3).The stated 10 year warranty is limited to only one brand new replacement for each part purchased during 10 year warranty time period.
(4).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues within 90 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(5).ECCPPAUTOPARTS promises free replacement due to quality defects or item not as described issues after 90 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise ECCPPAUTOPARTS has the right to refuse any replacement requests.
(6).ECCPPAUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
(7).Anyone who attempts to execute 10 year warranty procedures must be the original purchaser of the item(s), otherwise 10 year warranty terms void immediately.
(8).Anyone who attempts to execute 10 year warranty procedures must provide screenshot of his or her original eBay order details if required, including buyer user name, shipping address, item title, item id, final sales price.
(9).ECCPPAUTOPARTS has the final power of interpretation of the above 10 Year Warranty Terms and Procedures.
(1).Most of items support 60 Days Money Back Guarantee.
(2).Refunds will be credited within 2 or 3 business days after returned item(s) is received.
Copyright of ECCPP. All rights reserved.