Fuel Filter Water Separator Spin-on R12T 120A Replacement Element For Racor

Description

Home
Payment
Shipping
About us
Contact us
Details
Product Description
Attention:Please tighten the filter by yourself when installing it.Please fill the filter with fuel before installation.
R12T filter and nylon collection bowl of Marine Fuel Filter Water Separator NPT,ZG1/4-19.It can be used for diesel.
This spin-on filter design is easy to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted impurity and water.Tighten the valve,the water will not discharge.Release the valve,the water can be free to discharge.
Filters are designed for high performance applications,and with flow rate of 15 GPH on the R12T model,your engine will perform better than ever with clean,water-free fuel.
Don't be caught in the water without one of these diesel spin-on filters.The inlet and out let can be feed in on the same side or in one side out the other side.
Specifications
These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers.
Part Number:Replaces S3240 R12T 120AT;Replaces 18-7987;Replaces RK10222
Maximum Flow Rate:30 GPH (57 LPH)
Filter Rating:10 Micron.
Inlet/Outlet thread size:ZG1/4-19
Port/Connecting Size M18 X 1.5 Center Thread.
Installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.Lube the O-rings of filter.
2.There are 4 ports,two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installed the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very easy to operate, you'd better use the tool to install tighten.
Payment Method
Shipping Policy
Returns Policy
[RETURN_POLICE]
About us
Contact us
Home
Payment
Shipping
About us
Contact us