Juniper PB-1CHOC12-STM4-IQE-SFP 1-Port Channelized OC12 Channelized STM4

Description

This is a Juniper PB-1CHOC12-STM4-IQE-SFP 1-Port Channelized OC12 / Channelized STM4.  Bulk Packaging.
USA SELLER !!!
Ships from Austin, Texas !!!
We are a Mom and Pop local business!!!
All the Money is spent back in the local and US economy!!!
Thank you for the business!!!
FAST SHIPPING!!!
Condition:
Excellent Super Clean, Pristine condition!
Part #:
PB-1CHOC12-STM4-IQE-SFP
Description:
Juniper PB-1CHOC12-STM4-IQE-SFP  1-Port Channelized OC12 / Channelized STM4
Series:
Multiservice Edge Router Interface
You will receive what is shown in the photos only, 1 unit, the photo shows the entire case of 9 cards but this listing is for only 1 of them. There is nothing additional.
Manufacturer Description:
One OC12/STM4 port
SONET or SDH is configurable on a per-port granularity
SONET channelization (1-port PIC):
1 OC12 channel
4 OC3 channels
12 DS3 channels
336 DS1 channels
1011 DS0 channels
SDH channelization (1-port PIC):
1 STM4 channel
4 STM1 channels
12 E3 channels
252 E1 channels
12 DS3 channels (Junos OS Release 10.1 and later)
336 DS1 channels (Junos OS Release 10.1 and later)
1011 DS0 channels
Power requirement:
1-port: 0.64 A @ –48 V (30.7 W)
Model number
for 1-Port IQE PIC: PB-1CHOC12-STM4-IQE-SFP
Features:
(when using appropriate software - not included)
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection (RED), weighted random early detection (WRED)
Enhanced fine-grained queuing per logical interface. See the Class of Service Feature Guide for Routing Devices for more information about class of service features.
Subrate and scrambling:
Digital Link/Quick Eagle
Kentrox
Larscom
ADTRAN
Verilink
Packet buffering, Layer 2 parsing
M13/C-bit parity encoding
DS3 far-end alarm and control (FEAC) channel support
Local line, remote line, and remote payload loopback testing
Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB
Dynamic, arbitrary channel configuration
Full bit error rate test (BERT)
Encapsulations:
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Extended Frame Relay for CCC and TCC
Flexible Frame Relay
Frame Relay
Frame Relay for CCC
Frame Relay for TCC
Frame Relay port CCC
High-Level Data Link Control (HDLC)
HDLC framing for CCC
HDLC framing for TCC
MPLS CCC
MPLS TCC
Multilink Frame Relay (MLFR) UNI NNI (MFR FRF.16)
Point-to-Point Protocol (PPP)
PPP for CCC
PPP for TCC
Encapsulations available only for DS1:
Multilink Frame Relay end-to-end (MLFR FRF.15)
Multilink PPP (MLPPP)
PPP over Frame Relay
Cables and connectors
(not included):
Duplex LC/PC connector (Rx and Tx); single-mode fiber
SONET/SDH OC12/STM4 fiber-optic SFP transceivers:
Short reach (model number: SFP-OC12-SR)
Intermediate reach (IR-1) (model number: SFP-OC12-IR)
Long reach (LR-1) (model number: SFP-OC12-LR)
LEDs
One tricolor per port:
Off—Not enabled
Green—Online with no alarms or failures
Yellow—Online with alarms for remote failures
Red—Active with a local alarm; router has detected a failure