MORAD VHF-156HD HEAVY COMMERCIAL MARINE VHF BAND ANTENNA. USA MADE ! !

Description

MORAD VHF-156HD HEAVY COMMERCIAL  VHF MARINE BAND ANTENNA USA MADE !
The Morad Heavy Duty (HD) Marine VHF antenna is designed to give years of optimum performance under
the most severe weather and vibration conditions. Due to its excellent propagation pattern and low angle
of radiation, clipping and fading are minimized.
The design of this antenna enables it to consistently outperform its competitors. Use of a larger diameter
rod instead of small wire decreases resistive losses and provides an increased radiating surface.
The model VHF-156HD is base-fed through a PL-259 UHF connector and a 50-ohm coaxial cable and can
be mounted on any Morad 1-inch diameter stanchion for extra height.
All internal aluminum parts are made of corrosion-resistant alloys. The antenna body is white powdercoated
aluminum with nylon end caps and has a high strength stainless steel tip.
Antenna Gain / Pattern 6dB / Omnidirectional
SWR Nominally 1.15: 1 @ 146 MHz (center freq.)
Bandwidth 10MHz less than 1.5: 1 VSWR
Construction Aluminum tube, Stainless Steel Whip
Coating/Color Finish Powder Coated (White)
Base connector S0239 (connects to PL259)
Power / Impedance 100 Watts max. / 50 Ohms
Wind Survival 100 mph
Mounting Adaptors available for ratchet or stanchion mount
Dimensions 56-1/2”H x 1-13/16” dia. (max). 1.5 lbs. (2.5 lb. shipping
FIRST PICTURE SHOWS ANTENNA
SECOND PICTURES SHOWS CUTAWAY OF ANTENNA
ANTENNA CAN BE MOUNTED ON 1" STANCHION OR PIPE
DOES NOT COME WITH THE PIPE !! STANCHIONS AND MOUNTS AVAILABLE