PORTABLE SELF CONTAINED COLD WATER PRESSURE WASHER

Description

MAGNUM Trailer Mounted Portable Cold Water Pressure Washer
This is a Brand New 2014 Model Cold Water Trailer Mounted High Pressure Belt Drive Washer.
Great Starter Unit for Car Detailers or House Washers!
They are designed for years of use.  Units come standard w/ a
1 year warranty on the entire system and 5
years on the pump crankcase.  Each unit includes - a 3500psi @ 3.7gpm, Honda Gas Engine, Cold Water, Belt Driven High Pressure Washer, 50' 5800psi High Pressure Hose, Trigger Gun, 48" Insulated Single Lance Wand Assembly w/ Side Grip, 5 Quick Connect Color Coded High Pressure Nozzles, Matched High Pressure Stationary Hose Reel, 275 Gallon Square Water Tank Plumbed w/ a Dump Valve, 5'x8' Single
Axle Trailer w/ DOT Lighting 3500LB Axle, 2" Coupler, Swivel Jack, 2x10 Treated Wood Flooring.
Specifications:
MAGNUM CTCBA 3504
·
Cold water pressure washer
·
3.7
gpm @ 3500 PSI
·
Honda
13HP Engine
·
Belt driven Tri-plex oil bath pump
·
3600psi safety relief
·
Pressure trapping
unloader
·
Remote downline / l
ow pressure soap injection
·
Stationary
high pressure hose reel
·
5
0’ R2 wire 5800psi high pressure hose
·
Five
quick connect nozzles
·
27
5 Gallon Water tank plumbed with a 2" dump valve for quick draining
Trailer Specifications:  (Image Shown has a lift gate on the trailer.  Our Standard Unit does not have a gate.  This will be an additional charge.)
·
Single
axle 3500lb.
·
Dimensions: 5' wide X 8
' length
·
DOT
approved wiring & lights
·
2x10 Pressure Treated Wood Plank Flooring
Warranty Information
·
5
Y
ear back end pump warranty
·
90 Day warranty on wear parts
·
1 year labor warranty
Unit is Brand New & includes manufacturers' warranty (details above). Technical assistance will be available to the purchaser of the unit.
SYSTEM TYPE:
Cold Water, high pressure, gas powered, portable pressure washer.
U
nit has appropriate fully automatic safety controls.  Unit conforms with CGA, CSA, &/or ETL Certification.
Manufactured by an American Based Company and must conform to CETA Performance Standards and the Underwriters Laboratories standard for pressure washers – UL-1776.
GENERAL SPECIFICATIONS
:
Discharge
3.7
GPM
Pressure
3500 PSI
Gas Engine
13
HP / 389CC HONDA
HOSES
:
All Hoses 3/8” ID double steel braid type exceeding SAE100R2 performance specifications.
E
quipped with a swivel and safety protection bend restricting collars.
Rated Rated at
5800 PSI at 250° F.
TRIGGER GUNS
:
Insulated pistol type safety shut off gun supplied shall be rated at 10 gpm, 5000 psi, and 300° F.
Constructed from Fiberglass – reinforced polyester with brass and stainless steel valves and seats.
WANDS
:
A 48” single lance wand with side grab handle on wand for operator protection.
NOZZLES
:
Appropriate high pressure nozzles for single gun operation shall be supplied in 0° 15° 25° & 40° flat spray pattern plus a brass soap nozzle. The nozzles shall be of a through hardened 420 stainless steel material with an interlock coupler nipple made of annealed 303 stainless steel with 80 Rockwell hardness rating.
DRIVES
:
Belt drive system with cast iron bushed bore pulley, grip notch V-section size B belts, and adjustment plate for proper belt tension and alignment.
All belts to be covered by safety machine cover.
HIGH PRESSURE PUMP
:
Triplex, Ceramic plunger, oil bath crankcase type with forged brass head, mounted on a vibration isolation deck.
Pump bypass loop shall be equipped with 145° thermal relief valve.
UNLOADER VALVE
:
The pressure washer shall be equipped with a pressure trapped unloader valve suitable for single gun operation rated for a minimum of 8 gpm at 3900 psi.
FRAME
:
Unit mounted to a heavy 100% stainless steel - vibration isolation frame.
Components to be located for ample service/inspection accessibility.
HOSE QUICK CONNECTIONS
:
Quick couple connectors with stainless steel retainer ring & support balls.
SAFETY RELIEF VALVE
:
A high pressure safety relief valve shall be installed as a secondary safety device in the event an over pressurization condition occurs.
This device shall be located at the outlet of the pump and shall be set at 3900 psi.
Shipping -
We have many shipping options. Shipping to most states is roughly
.95 per mile. Contact us for a no obligation freight quote.
Thanks for looking - please check back often as we are continually adding items.
Please email or call us @ 1.800.476.9274 w/ any questions or for additional information, ask for Rodney - Thanks Again!
*
Images Are For Representation Purpose Only. Actual Product May Vary Slightly.