RG-58 SMA male to UHF female SO239 (20 inch) Antenna jumper cable

Description

start_elivehelp_btncode
end_elivehelp_btncode
NEW American made
MIL-C-17 Standard
RG-58 Cable Assemblies
RG-58 SMA male to UHF female SO239 (20 inch)
CLICK HERE FOR MANUFACTURER SPECIFICATIONS
Dependability. Efficiency. Quality.
These are the three core principles behind our RG-58 Coax Antenna cable.
Made with pride in the USA using U.S.A. Manufactured Cable
, this cable is made only from quality components to ensure the optimal signal for your Wireless network or Ham / CB radio. If signal strength and propagation are your concerns, this coax cable more than meets all your requirements.
This highly flexible .2 inch coax is fully compliant to US Military Specification transmission and construction specifications. Our coax cables aren't cheap offshore copies but US-made products of high precision quality control and mission critical attention to detail. If you're looking for high quality Mil Spec compliant products, buy 50 ohm RG-58 Antenna coax and Jumpers today and see the difference.
There is a Huge Difference between Genuine US Made and cheap Chinese Imitations
•
Flexible
: With a 1/3-inch minimum bend radius, our RG-58 cable can be easily routed into and through tight spaces without kinking.The outer conductor provides superior flexibility and ease of bending compared to corrugated copper or smooth wall copper hard-line cables.
•
Low Loss
: This is achieved through the use of a high velocity dielectric and a fully shielding braided Copper outer conductor.
A Large Number of Chinese Producers are using ALUMINIUM for shielding materiel...
The proprietary closed cell PE dielectric prevents water migration through the cable and provides excellent crush resistance.
•
Weatherproof
: The UV protected black polyethylene jacket makes the cable rugged and resistant to the full range of outdoor environments. The DB version of the cable includes a water blocking material within the braid to protect the cable from moisture ingress and corrosion in harsh environments or should the jacket become damaged. Various jacket materials are available to address other environmental and indoor requirements.
•
RF Shielding
: The outer conductor is overlapped using Braided Copper Shielding to provide 96% coverage, resulting in >90 dB RF shielding (>180 dB crosstalk) and excellent interference immunity (ingress and egress).
•
Phase Stability
: The intimately bonded structure and foam dielectric of our cables provide excellent phase stability over temperature and with bending.The high velocity dielectric results in superior phase stability as compared with solid and air-spaced dielectric cables.
•
Connectors and Assemblies
:
MPD Digital
provides jumper cable assemblies fabricated with 100% U.S.A. Made cable and a variety of connector interface combinations.  Custom assemblies with phase matching, insertion loss matching, and other special electrical or marking requirements can also be provided. A good selection of connectors is available for RG-58 cable as shown in our store. Custom configurations are easily produced.
But Yours Costs More!
A word on Our Coaxial Cable Pricing
Pricing by the foot
- We price our cable assemblies by the foot including the cost of installed connectors.  While the price of the coax varies by length, the cost of connectors is fixed.  This means that the sales price of shorter cables varies very little.  Our cables are expected to have a life span of up to 20 years in amateur radio and wireless use. While we are happy to make your cable any length you like it may be wise to purchase one a little longer than you need in case your setup changes.
Factory Direct
- We purchase our coax factory direct from manufacturers in 250,000 foot orders.  We buy Connectors in Lots of 5000. This allows us to purchase at a quantity discount, pass savings on to our customers, and maintain a stock level to fulfil orders.
Cutting Corners
- We can purchase the Chinese coax sold by the majority of sellers here on eBay for
Over 60% Less
than what we pay. With copper prices up over 300% in the last years there is more pressure than ever on producers and sellers profit margins.  Many sellers have started selling this cheaper coax as "LMR240 or LMR400" at almost the same cost as we charge for the real thing.  We have purchased some of this coax and found it weighs 15% less per foot than Genuine Times or Andrew cable.  Although we have we do not know if this is due to metallic or plastic composition it reinforces our commitment to the genuine article.
US Made Coaxial Cable Types we offer:
Times Microwave LMR-195
CLICK HERE TO DOWNLOAD THE Times Microwave Systems LMR-195 SPECIFICATION SHEET
Times Microwave LMR-240
CLICK HERE TO DOWNLOAD THE Times Microwave Systems LMR-240 SPECIFICATION SHEET
Times Microwave LMR-400
CLICK HERE TO DOWNLOAD THE Times Microwave Systems LMR-400 SPECIFICATION SHEET
Times Microwave LMR-400 Ultra Flex
CLICK HERE TO DOWNLOAD THE Times Microwave Systems LMR-400UF SPECIFICATION SHEET
Times Microwave LMR-400-75 (75 ohm)
CLICK HERE TO DOWNLOAD THE Times Microwave Systems LMR-400-75 SPECIFICATION SHEET
Andrew Commscope CNT-240
LMR240
CLICK HERE TO DOWNLOAD THE Andrew Commscope CNT-240 SPECIFICATION SHEET
Andrew Commscope CNT-400
LMR400
CLICK HERE TO DOWNLOAD THE Andrew Commscope CNT-400 SPECIFICATION SHEET
Mil Spec RG-214
About MPD Digital
Managed and operated by Kim Nelson, MPD Digital is a DBA of Kimberly Distribution LLC.  From our production facility in Albany, Georgia, Kim has been making coaxial cable assemblies using US Made components with thousands sold to Amateur Radio operators, Public Institutions and the US Military.  We are a Small, Veteran Owned business.
Contacting Us
Note:
While we try to answer all phone calls, if you call in the afternoon all of us may be in production so you may get voicemail.
International Shipping
We will Gladly ship to most Countries pursuant  to the following rules:
EBay Customs Notice for International Buyers
:
We have never had a package held up or taxed by Customs but there is always a possibility.
International Buyers
– Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.
ALL international shipping is done via USPS Air Mail. You can check the rates for your location at USPS.Com and just add to the direct cost to pay for our packaging and transport. I can ship other ways but the cost is
much
more expensive.  Shipping to Canada is double for signature items with tracking numbers and delivery to Europe and Australia is more than triple the USPS Air Mail cost.  In most cases it is not cost effective to buy my items and pay three times the price to ship them...  For more expensive items over I will offer the option of tracked shipping but in most cases you will be better off buying locall
y.
Payments
You may pay is Online or via Phone or Fax. As we are a physical business, we accept both Paypal and major Credit Cards
Sales Tax
Only Georgia Residents will be charged sales tax.
Too much attenuation or signal loss?
send it back
.  VSWR too high?
Send it back
.
Please see the fine print!
The Fine Print
:
If you cut it up you keep it.   Cable should be in "like new" condition, teeth marks/burns/slices etc. are not acceptable.  Please don't run it up a tower and scrape/fray it then change your mind.  Run all tests while still coiled.
If we have installed custom non-stock connectors at your request we will not refund the price of the new connector we installed for you.   If
you
have installed custom connectors we will not refund what you paid for them.