Speedway Zinc Plated 1937-48 Ford Drop Steering Arms, 3-3/4 Drop

Description

These drop steering arms feature a 3-3/4" drop to clear most radius rods and wishbones on spring-over front axles, The arms are available in either plain, chrome, or stainless steel to match the finish on the rest of your front end kit, These arms attach to all 1937-48 Ford spindles allowing you to use common spindles and components, They accept 11/16" Ford 7 degree tapered tie rod ends, or can also be drilled out to 5/8" for use with heim joint spherical rod ends, Both the top and bottom of the arm is tapered to allow attachment of the tie rod ends on either side for adequate clearance
Speedway Zinc Plated 1937-48 Ford Drop Steering Arms, 3-3/4 Drop
Sku # 7022756-PLN
Mfr. Part # 7022756-PLN
Condition
New
Brand
Speedway Motors
Sold
Pair
Details
Info
These forged steel steering arms will attach to all 1937-48 Ford spindles but their greater drop, 3-3/4" from spindle mount holes means they work best on 1935-48 Ford cars (with
spring-over
front axle). Clears most radius rods and wishbones. These steering arms accept 11/16" Ford 7 degree "tapered" tie rod ends
(both the top and bottom are tapered to allow tie rods to mount above or below arm as needed)
. You can drill-through with a 5/8" bit to use spherical rod ends.
Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.
Specs
3-3/4" drop (measured from center of threaded spindle mount holes to the bottom face of the arm, as positioned in the photo)
3-3/8" eye-to-eye centers on mount bolt holes
Charts
(GIF)
(GIF)
Installation Tips
For use with spring-over front axles ONLY. Should NOT be used with spring-behind front axle assembly. Flat plate arms are required when using a spring-behind front axle.
Use a 46" eye-to-eye tie rod link when used with a 48" wide axle with Ford spindles.
Specs
Material Type
Steel
Sold in Quantity
Pair
Degree of Taper
7 degree
Notes
Made from 1045 steel
Center to Center
3.375
Drop
3.75
Finish
Zinc Plated
MFG. Part #
7022756-PLN
Reviews
Beautifully Chromed Steering Arms Fit Perfectly
Rated
by Chiefie on November 13, 2021
Summary:
I initially got the wrong drop arms for my 1932 Ford I am building with a 1940 Ford front end with four links. These fit perfectly and the chrome was just a little bit more expensive than the plain making them a no brainer to purchase and the look great.
Pros:
Bolt on perfectly
beautifully chromed
Works great on my project
Rated
by Josh on January 28, 2021
Summary:
I installed them on a 4" I beam axle kit from speedway and no problem with installing it works great
Yes, I recommend this product.
Yes I would buy these again
Rated
by BO on November 02, 2020
Summary:
Still in the building process but the steering arms are good quality
Yes, I recommend this product.
I would buy this again
Rated
by Josh on May 11, 2020
Summary:
I used this on my model a steering set up works great
Yes, I recommend this product.
Nice products just wish there was more of a kit "or list of
Rated
by Scooter 76 on November 23, 2019
Summary:
First time building something this old. Bought the four bar/link front end kit. Definitely needed the spring they said(after the fact of trying to use the stock one). Then after scratching my head for awhile bought these steering arms. I still had to put a slight bend in the drag link to clear the four bar, but all together now. Looks good and seems to be quality parts.
Yes, I recommend this product.
Related Items / Suggested Parts
1937-48 Ford Steering Arms, 1-3/4 Inch Drop
Bolt Kit for Ford Spindles/Steering Arms/Brake Brackets
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.