Transition Networks POE+ Injector/ Convertor (1) SFP and (2) POE ports

Description

This is for One(1) Transition networks SI-IES-121D-LRT Unmanaged Hardened POE+ Injector/ Convertor.
Description
The SI-IES-121D-LRT is a (3) port unmanaged hardened PoE+ injector / converter that adds up to 30 Watts of power from its (2) PoE+ ports onto 2 network segments. The gigabit speed SFP slot provides the ultimate flexibility by allowing fiber SFP uplink ports with varying communication distances.
Features
IEEE 802.3at PoE+ to supply 30 Watts per port
Supports IEEE 802.3af
Supports dual speed for SFP slot
Non-blocking architecture
Compact, space saving size
IP31 housing protection
Link Pass Through
Extended operating temperature (-40C to 75C)
DINmount / optional wall mount brackets included
Full/half-duplex flow control
Auto-MDI/MDIX
Auto-Negotiation
Store-and-forward transmission
10K byte jumbo frames
Specification Description
Item: Hardened Mid-Span PoE+Injector
Status LEDs: PWR1: On=Primary Power Connected; PWR2: On=Backup Power Connected; PoE+ Port Link/ACT; PoE+ Port Gigabit Transmission; SFP Port Link/ACT
Connectors: (1) DATA IN SFP Ethernet Port; (2) DATA OUT PoE+ RJ45 Ethernet Port 30 Watt
Ingress Protection: IP30
Installation: Din-Rail, Wall-Mount (Optional)
Input Power: 48 Volt DC
Power Consumption: 3.525 Watt (No PoE), 63.5 Watt (2 Port PoE)
Environmental Conditions: -40 to 75 deg C Operating Temperature; -40 85 deg C Storage Temperature; 5 - 95% Humidity Non-Condensing; 0 - 10000 ft Operating Altitude
Port One: (1) 100/1000BASE-X Dual Speed SFP DATA IN
Port Two: (2) 10/100/1000BASE-T PoE+ DATA OUT
Dimension: 1.440 Inch Width x 3.720 Inch Depth x 4.260 Inh Height
Tech Info
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3z, Safety: UL508, Compliance FCC Class A, CE Mark, EN61000-6-4, EN61000-6-2, EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000- 4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6(CS) EN61000-4-8 (Magnetic Field), IEC60068-2-27 (Shock), IEC60068-2-32 (Free Fall), IEC60068-2-6 (Vibration)