Vega Steering Gear Box Pitman Arm Mounting Bracket w U Joint Street Rat Rod Ford

Description

HOT ROD VEGA MANUAL CROSS STEERING BOX W/ FLAT PITMAN ARM & 1935-41 FORD BRACKET
This 1932-41Fords Vega Box comes complete with the pitman arm, mounting bracket, and black ujoint
Fords Vega Box:
It is ideal for Street Rod applications and is smoother and stronger than OEM boxes.
Steering Shaft Spline: 5/8"-36
Ratio: 20 : 1
5 1/2" Turns (Lock-to-Lock)
Mounting pattern is 2 3/4" and 4 3/8" center-to-center of the three mounting holes
This is the stock configuration, meaning when you turn the input shaft clockwise, the output shaft also turns clockwise
Recommended for vehicles weighing 2800 lbs or less
Comes complete with the chrome dress cap.
Mounting BRACKET:
This bracket is designed to fit the tapered frames of the 1935-1941 Fords
It measures 3.155" between the tabs at the front and 3.380" between the tabs at the rear
Pitman Arm:
The pitman arm is ZINC and non-offset design. Double-tapered "Ford" tie rod end hole allows you to attach the drag link on the top or on the bottom.
Tapered tie rod hole measures 0.625" on both sides and tapers down to 0.585" in the center of the hole.
Spline Count: 36
Hole Diameter .625
Overall Length 7.87Center to Center 6.375
Black Ujoint:
5/8-36" x 3/4" DD Black U-Joint.
Professional Installation is Highly Recommended(
Installation Instruction is NOT Included)